[OSLC-RM] Link types
James Conallen
jconallen at us.ibm.com
Wed Oct 7 08:42:23 EDT 2009
I too think that we need to accept for the fact that now each group will
have its own solution, (which are somewhat similar when you consider the
potential). I also think that no matter what is done, clients will have to
change in the future, so why not do something now to support the essential
use cases and get us all started.
In your second point, you describe a potential property of a link type
definition. The ability for a specific link type to restrict what can be
on either end based on the 'domain' of the resource, or maybe even the
specific type of resource. I worry about getting this aspect of link
definition right so early on. While I think a generic and flexible link
management system can be defined for 1.0, I think this particular aspect of
a link type's definition might not be necessary or 1.0.
<jim/>
jim conallen
jconallen at us.ibm.com
Rational Software, IBM Software Group
|------------>
| From: |
|------------>
>--------------------------------------------------------------------------------------------------------------------------------------------------|
|Torge Kummerow <torgato at gmx.de> |
>--------------------------------------------------------------------------------------------------------------------------------------------------|
|------------>
| To: |
|------------>
>--------------------------------------------------------------------------------------------------------------------------------------------------|
|oslc-rm at open-services.net |
>--------------------------------------------------------------------------------------------------------------------------------------------------|
|------------>
| Date: |
|------------>
>--------------------------------------------------------------------------------------------------------------------------------------------------|
|10/07/2009 08:21 AM |
>--------------------------------------------------------------------------------------------------------------------------------------------------|
|------------>
| Subject: |
|------------>
>--------------------------------------------------------------------------------------------------------------------------------------------------|
|Re: [OSLC-RM] Link types |
>--------------------------------------------------------------------------------------------------------------------------------------------------|
|------------>
| Sent by: |
|------------>
>--------------------------------------------------------------------------------------------------------------------------------------------------|
|oslc-rm-bounces at open-services.net |
>--------------------------------------------------------------------------------------------------------------------------------------------------|
ic
Well, it can?t hurt, if each group is presenting a solution it thinks is
the best approach. The consolidation will have to take place IHMO and
then as lots of input for finding the best solution.
I also think that not only the linking spec should be defined globally,
but also the mechanism in doing so shouldn't care which objects are
being linked right now, only the LinkTypes should care. (An RM->RM
LinkType can?t link a QM object with an CM object for example)
Greetings,
Torge
James Conallen schrieb:
> I absolutely agree. A uniform linking approach is critical to cross
> domain collaboration.
>
> The problem is that most of the new OSLC workgroups are on the hook to
> provide a 1.0 specification by the end of this calendar year. The
> governing philosophy of the OSLC has been to deliver small sets of
> specifications that provide value immediately, and that can be built on
> later.
>
> With that said we can either skip any attempt to define how links can be
> managed, since it will most likely change once things are consolidated
> later (the OSLC is working on providing common specifications across all
> domains). Or we can provide something that is useable now, but will most
> likely have to be changed later.
>
> If we don't do anything now, the spec will be incomplete with respect to
> the essential use cases, since it will require additional knowledge of
> the implementing system to be able to manage links, and that is
> essentially another form of point-to-point integration that we see
> across the tools today. If we do specify either a flexible approach, or
> just define a fixed set of what we consider common link types, then
> clients built to this spec will have to change (possibly losing
> functionality) when the later ones come out.
>
> <jim/>
>
> jim conallen
> jconallen at us.ibm.com
> Rational Software, IBM Software Group
>
>
>
> Inactive hide details for "Simon Wills" ---10/07/2009 07:47:09
> AM---Hi"Simon Wills" ---10/07/2009 07:47:09 AM---Hi
>
>
> From:
> "Simon Wills" <simon.wills at integrate.biz>
>
> To:
> "Ian Green1" <ian.green at uk.ibm.com>, James
Conallen/Philadelphia/IBM at IBMUS
>
> Cc:
> <oslc-rm at open-services.net>
>
> Date:
> 10/07/2009 07:47 AM
>
> Subject:
> RE: [OSLC-RM] Link types
>
> ------------------------------------------------------------------------
>
>
>
> Hi
>
> I think that there are three distinct issues here, namely:
>
> a. Whether there is a need for a uniform approach to
> defining link-related resources across OSLC;
> b. Whether we attempt to define a minimal set of
> standardised link types;
> c. Assuming that we **do** adopt a uniform approach to
> linking across OSLC, how and when we do so.
>
> Of these points, deciding whether or not to implement a uniform linking
> model is by far and away the most important. Standardising link labels
> is a 'nice to have' that follows on from this first decision (this was
> the main focus of the RM discussion document), but is something that we
> can live without. And the last point is to do with implementation.
>
> Ben's interests (i.e. reporting) provide a good illustration of the key
> issue. If I understand correctly, he wants to be able to generate
> reports about lifecycle artefacts, some of which may require him to
> traverse links between artefacts, without having to make allowances for
> the domains in which those artefacts live. This seems to me to be
> entirely reasonable -- and reporting isn't the only domain for which this
> expectation holds.
>
> OSLC stands for Open Services for Lifecycle Collaboration. Lifecycle
> collaboration requires that we leverage relationships between lifecycle
> artefacts. If we don't tackle the issue of uniformity in the handling
> of links, we risk ending up with a series of poorly connected domain
> islands, each with its own domain-specific linking paradigm. Surely
> there is a /prima facie/ case to recognise that links are the things
> that tie these domains together, and hence that the definition of
> link-related resources and their behaviour should be common across all
> OSLC domains?
>
> Best regards
>
> Simon
>
> *From:* oslc-rm-bounces at open-services.net
> [mailto:oslc-rm-bounces at open-services.net] *On Behalf Of *Ian Green1*
> Sent:* 07 October 2009 11:39*
> To:* James Conallen*
> Cc:* oslc-rm at open-services.net*
> Subject:* Re: [OSLC-RM] Link types
>
>
> Hello Jim,
>
> I think your description of how OSLC links currently work in the
> defining of a relationship is accurate. There has been some discussion
> about the merit of such a design, since it is exposed to a fragility,
> namely, that for each link, there should be a corresponding link in the
> other direction. The need for the "backlink" as it has been called, aids
> navigability (we typically want the relationship to be navigable in both
> directions). It is also reasonably easy to implement.
>
> The fragility is maintaining this invariant: for example, when a
> resource is deleted, any "backlinks" to that resource should be removed.
> There are other "relationship management" designs which don't have this
> weakness.
>
> My reading of Simon's document is that it is talking about these
> relationships, rather than the lower-level "nuts and bolts" of how one
> resource links to some other resource. We need to think about how we can
> uniformly manage these relationships across all the domains.
>
> best wishes,
> -ian
>
> ian.green at uk.ibm.com (Ian Green1/UK/IBM at IBMGB)
> Chief Software Architect, Requirements Definition and Management
> IBM Rational
>
> From: James Conallen <jconallen at us.ibm.com>
> To: Benjamin Williams/UK/IBM at IBMGB
> Cc: Ian Green1/UK/IBM at IBMGB, oslc-rm at open-services.net
> Date: 06/10/2009 16:44
> Subject: Re: [OSLC-RM] Link types
>
> ------------------------------------------------------------------------
>
>
>
> I have one concern about the link types document's attempt to define
> *both* the forward and reverse links. I believe that the general OSLC
> mechanism for creating bi-directional links is to create two
> unidirectional links managed by each server, and hope that it is
> possible with a query on the other server to find the right back link
> when deleting.
>
> If this is the case, then we should probably restrict the definition of
> the link types to those that are managed by the OSLC RM implementing
> service, and not make assumptions that all the other services (i.e. OSLC
> CM, OSLC AM, OSLC QM, ...) will support these OSLC RM defined link types.
>
> In the OSLC AM space our scenarios have all sorts of link types that are
> referenced. For example a model element can implement a requirement, or
> specify a requirement, or a requirement resource can be documentation
> (i.e. how to guide) for a model element. Given that both models and
> requirements can be used in many different ways, it is hard to pin down,
> generically, just a few relationship types between AM resources and
> requirements. With this said, if we just say that links from
> Requirements to Architecture Management Resources will be one of
> (modeledBy, realisedBy or incorporatedBy) that will be fine from an OSLC
> AM client point of view.
>
> <jim/>
>
> jim conallen
> jconallen at us.ibm.com
> Rational Software, IBM Software Group
>
>
>
> Inactive hide details for Benjamin Williams ---10/06/2009 10:22:09
> AM---Ian As per my other email on reporting, I feel that sucBenjamin
> Williams ---10/06/2009 10:22:09 AM---Ian As per my other email on
> reporting, I feel that such such collaboration
>
>
> From:
> Benjamin Williams <bwilliams at uk.ibm.com>
>
> To:
> Ian Green1 <ian.green at uk.ibm.com>
>
> Cc:
> oslc-rm at open-services.net, oslc-rm-bounces at open-services.net
>
> Date:
> 10/06/2009 10:22 AM
>
> Subject:
> Re: [OSLC-RM] Link types
>
> Sent by:
> oslc-rm-bounces at open-services.net
>
> ------------------------------------------------------------------------
>
>
>
> Ian
>
> As per my other email on reporting, I feel that such such collaboration
> and consistency across domains will be extremely important, if not
> absolutely necessary.
> Specifically in the context of reporting, the features exposed by
> service providers across each domain will need to (consistently) support
> the requirements and use-cases defined in the Reporting domain such that
> reporting consumers can leverage lifecycle data without needing any
> knowledge of the source domains and any differences in the way they
> expose data.
>
> The scenarios and use-cases that we are defining in the reporting domain
> should be entirely domain agnostic, as far as I am concerned. We can use
> specific examples for both single domain reporting as well as cross
> domain reporting, but the domains used in the examples should be freely
> interchangeable without any impact on the reporting consumer.
>
> The reporting domain is still in its infancy, and my involvement in OSLC
> is only just beginning, but from what I understand, the reporting domain
> might be one of the first things to force us to think about some of the
> cross domain issues that you and Simon have discussed.
>
> /Ben
>
>
-----------------------------------------------------------------------------
> Benjamin Williams
> Senior Product Manager - Rational Publishing Engine
>
> Email: bwilliams at uk.ibm.com
> Tel: +44 20 8818 4360
> Cell: +44 7710 637 067
> IBM Extension: 364360
> IBM ITN: 37364360
>
-----------------------------------------------------------------------------
>
>
> From: Ian Green1/UK/IBM at IBMGB
> To: "Simon Wills" <simon.wills at integrate.biz>
> Cc: oslc-rm at open-services.net
> Date: 06/10/2009 14:16
> Subject: Re: [OSLC-RM] Link types
> Sent by: oslc-rm-bounces at open-services.net
>
> ------------------------------------------------------------------------
>
>
>
>
> Hello Simon,
>
> this is good progress both on explaining our current position w.r.t.
> link types, and also taking a longer term view of the role we see link
> types playing the future. Thanks very much for putting this together.
>
> Steve/Scott: whilst there is no pressure as yet to drive this forward,
> Simon makes a good case for any such effort to be cross-OSLC domains.
> How do you see this shaping up over time? Is there some tension between
> designing an OSLC-wide vocabulary and being entirely scenario-driven?
>
> best wishes,
> -ian
>
> ian.green at uk.ibm.com (Ian Green1/UK/IBM at IBMGB)
> Chief Software Architect, Requirements Definition and Management
> IBM Rational
>
> From: "Simon Wills" <simon.wills at integrate.biz>
> To: Ian Green1/UK/IBM at IBMGB
> Date: 05/10/2009 15:42
> Subject: Link types
>
>
> ------------------------------------------------------------------------
>
>
>
> Hi Ian
>
> Just to let you know ... I've put a new section titled 'Discussion
> Topics' in the right hand sidebar of the main RM page, and put a link to
> a discussion document on link types (at
> _http://open-services.net/bin/view/Main/RmDiscussionLinkTypes_). Haven't
> quite sussed out how to format tables properly in the Wiki editor, but
> the content is all there.
>
> Would you like me to put out an announcement on the mailing list?
>
> Cheers
>
> Simon
>
> ------------------------------------------------------------------------
>
> Simon Wills
> Managing Director *
> integrate systems engineering ltd*
> m: +44 (0)7967 091824
> t: +44 (0)1225 859991
> f: +44 (0)1225 859993
> e: simon.wills at integrate.biz
> w: _www.integrate.biz_ <http://www.integrate.biz/>
> ------------------------------------------------------------------------
>
>
>
>
> ------------------------------------------------------------------------
>
> /Unless stated otherwise above:
> IBM United Kingdom Limited - Registered in England and Wales with number
> 741598.
> Registered office: PO Box 41, North Harbour, Portsmouth, Hampshire PO6
3AU/
>
>
>
>
>
> _______________________________________________
> OSLC-RM mailing list
> OSLC-RM at open-services.net_
> __http://open-services.net/mailman/listinfo/oslc-rm_open-services.net_
>
>
> ------------------------------------------------------------------------
>
> /Unless stated otherwise above:
> IBM United Kingdom Limited - Registered in England and Wales with number
> 741598.
> Registered office: PO Box 41, North Harbour, Portsmouth, Hampshire PO6
3AU/
>
>
>
>
>
> _______________________________________________
> OSLC-RM mailing list
> OSLC-RM at open-services.net_
> __http://open-services.net/mailman/listinfo/oslc-rm_open-services.net_
>
>
>
> ------------------------------------------------------------------------
>
> /Unless stated otherwise above:
> IBM United Kingdom Limited - Registered in England and Wales with number
> 741598.
> Registered office: PO Box 41, North Harbour, Portsmouth, Hampshire PO6
3AU/
>
>
>
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> OSLC-RM mailing list
> OSLC-RM at open-services.net
> http://open-services.net/mailman/listinfo/oslc-rm_open-services.net
_______________________________________________
OSLC-RM mailing list
OSLC-RM at open-services.net
http://open-services.net/mailman/listinfo/oslc-rm_open-services.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://open-services.net/pipermail/oslc-rm_open-services.net/attachments/20091007/a77bc774/attachment-0003.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: graycol.gif
Type: image/gif
Size: 105 bytes
Desc: not available
URL: <http://open-services.net/pipermail/oslc-rm_open-services.net/attachments/20091007/a77bc774/attachment.gif>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ecblank.gif
Type: image/gif
Size: 45 bytes
Desc: not available
URL: <http://open-services.net/pipermail/oslc-rm_open-services.net/attachments/20091007/a77bc774/attachment-0001.gif>
More information about the Oslc-Rm
mailing list